102). y – Panasonic BB-HCS301A User Manual
Page 102
Operating Instructions
102
2.18 Buffering or Transferring Images by Motion
Detection Signal
The Trigger page allows you to enable image buffer/transfer by E-mail or FTP.
Notes
•
A change due to light or wind may detect motions mistakenly.
•
Motion detection level is changed depending on resolution, image quality, and
object situation. Confirm the level by performing motion detection recording.
•
Enabling Motion Detection delays the frame rate of this product.
•
Objects moving fast may not be detected.
•
Motion Detection may not work in the dark.
1.
Click [Trigger] on the Setup page.
2.
Click [No.] to enable buffer/transfer.
3.
Check [Enable Image Buffer/Transfer], select [Motion Detection] for trigger,
and click [Next>].
Notes
•
If you click [Save], all buffered images on the SD memory card are deleted.
•
Click [Delete Buffered Images] to delete this buffered images.
•
Click [Save] to save the settings.
•
Clicking [Cancel] takes you back to the Trigger page without saving
changes.