Panasonic BB-HCS301A - Manual (Page 43)

Operating Instructions
[For assistance, please call: 1-800-272-7033] 43
Notes
• When you do not know this product IP address while setting [Automatic
Setup], you can search it by using the Setup Program (see page 155). Or
you can search it on the Status page (see page 133) after accessing this
product in IPv4.
• If this product is restarted, all buffered images on the internal memory are
deleted. The buffered images on the SD memory card are not deleted.
Setting Description
Allow Access from
the Internet
(Automatic Setup
Only) • If [Yes] is selected at the Allow Access from the Internet,
you can access this product from the Internet. If [No] is
selected, this product can be accessed only from the LAN
that has the same IPv6 prefix as this product.
Port Number (Static
Only) • The port number is 80 by default. The port number must be
unique for each terminal on your network.
• Do not set the following port numbers.
E.g., FTP: 20 and 21, Telnet: 23, SMTP: 25, DNS: 53,
POP3: 110, HTTPS: 443, ICQ: 4000 and IRC: 6661—
6667.
• Enter only the number (1—65535).
• Some ISPs do not allow you to use port 80. Ask your ISP
or network administrator about the accessible port number
over the Internet.
IP address
(Static Only) • Enter a global address. You do not need to enter prefix
length.
• IPv6 address consists of 8 hexadecimal digits divided with
":". Consecutive 0s can be abbreviated as "::".
(E.g. 2001:2:3:4::5)
Default Gateway
(Static Only) • If you have the assigned Default Gateway IPv6 address by
your ISP or network administrator, enter it in this data field.
• IPv6 address consists of 8 hexadecimal digits divided with
":". Consecutive 0s can be abbreviated as "::".
(E.g. 2001:2:3:4::5)