Panasonic BB-HCS301A - Manual (Page 140)

Operating Instructions
140
3.1.8 Resetting this Product to Factory Default
All settings are reset to factory default directly after the Execute button is clicked.
1.
Click [Reset to Factory Default] on the Maintenance page.
2. Click [Execute].
• The indicator blinks orange, and then turns off for 10 seconds.
• All settings (user name, password, IP address, subnet mask etc.) are
reset to factory default.
• If this product is reset to factory default, the network connection mode
changes to [Automatic Setup]. Reconfigure this product seeing the
Getting Started.
Notes
• Do not turn off this product during the reset operation.
• The internal clock will not be reset, but the time format will return to AM/
PM mode (see page 64). Set it again.
• See page 146—page 153 for default settings.
• Pressing the FACTORY DEFAULT RESET button resets this product to
the factory default (see page 145).
• All buffered images and alarm logs on the internal memory are deleted
when resetting this product to factory default. The buffered images on the
SD memory card are not deleted.
• The reset operation takes about 1 minute.
• If this product is restarted, all alarm logs are deleted.