Panasonic BB-HCS301A - Manual (Page 134)

Operating Instructions
134
3.1.3 Displaying Alarm Logs
Displays up to 50 Alarm Logs in order of time. Old logs will be overwritten by new
one.
1.
Click [Alarm Log] on Maintenance page.
2.
Alarm Logs are displayed.
Note
If this product is restarted, all alarm logs are deleted.
3.1.4 Restarting this Product
The Restart page can restart this product. This product restarts by disconnecting
the power cord from the outlet and reconnecting it again.
Note
When this product restarts, the buffered images and alarm logs will be deleted.
The buffered images on the SD memory card are not deleted.
1.
Click [Restart] on the Maintenance page.
2.
Click [Restart].
• Restarting takes about 1 minute. The Top page is displayed when finished.
Item Description
New Alarm Logs • Displays the number of new alarm logs.
Date • Displays the date and time when the Alarm or Motion
Detect was responded.
Sensor Type • Displays the Trigger Setting (Alarm or Motion Detection) on
the Trigger page.
Signal Type • Displays the Alarm enable condition on the Trigger page
when selected Alarm.