Panasonic BB-HCS301A - Manual (Page 127)

Operating Instructions
[For assistance, please call: 1-800-272-7033] 127
Notes
• Set the local IP address and port number for this product on the same
LAN.
• If this product is accessed from the Internet, be sure to use the global IP
address. In this situation, local IP addresses such as
192.168. . cannot be used.
4. Click [Save] when finished.
• New settings are saved.
• The Multi-Camera Setup page is displayed.
Setting Description
Display • Check the box to enable the image display.
IP Address *1 or
Host Name *2
• Set the IP address or the host name to enable the image
display.
Port No. • Set the port number (1—65535).
Camera Name *3 • The name is displayed only on the Multi-Camera page.
*1 In IPv4, set 4 digits (0—255) and 3 periods such as "192.168.0.253". But
"0.0.0.0" and "255.255.255.255" are not available.
In IPv6, set the host name.
*2 Enter ASCII characters for the host name (see page 163). But [Space], ["], ['],
[#], [&], [%], [=], [+], [?], [<] and [>] are not available.
Enter 1—255 characters.
*3 Enter ASCII characters (see page 163) or characters in each language (1—15
characters for a 1-byte character and 1—7 characters for a 2-byte character).
But [Space], ["], ['], [#], [&], [%], [=], [+], [?], [:], [<], and [>] are not available.