5 encrypt the camera image in transport mode – Panasonic BB-HCS301A User Manual
Page 48
Advertising
Operating Instructions
48
2.5
Encrypt the Camera Image in Transport Mode
This product can encrypt the image using IPsec transport mode.
Note
If you use IPsec, refresh interval slows down.
1.
Click [IPsec] on the Setup page.
2.
Click Camera in the Transport column.
•
If you use transport mode in E-mail or FTP transfer, click No. in the Buffer/
Transfer column.
Note
To display Alarm Log, set Alarm or Motion Detection for Trigger Setting
and check [Enable].
3.
Enter each parameter in the data field.
The display shows that
the communication is in
HTTP and any people can
access this product if they
have the pre-shared key.
Set up these settings to
transfer images in
transport mode (see page
116).
Set to use Alarm Log (see page 121).
Advertising