Panasonic BB-HCS301A - Manual (Page 118)

Operating Instructions
118
2.24 Setting the Motion Detection
The Motion Detection page allows you to adjust sensitivity of the Motion Detection.
Threshold: If the threshold is set low, this function sensitively detects changes.
Sensitivity: If you set sensitivity high, amplitude on the motion detection bar gets
jumpy.
1.
Click [Motion Detection] on the Setup page.
2.
Click the Motion Detection bar in Threshold to set the threshold level.
3. Click the Motion Detection bar in Sensitivity to set the sensitivity level.
4. Click [Save] to save the settings.
• Clicking [Cancel] cancels your settings without saving changes.
5. Click [Go to Motion Detection page].
• The Motion Detection page is displayed.
Setting Description
Threshold • Adjust the threshold for Motion Detection. Setting the
threshold lower allows subtler changes to be detected.
Sensitivity • If you set sensitivity high, amplitude on the motion
detection bar gets jumpy.