Panasonic BB-HCS301A - Manual (Page 65)

Operating Instructions
[For assistance, please call: 1-800-272-7033] 65
3. Click [Save] when finished.
• New settings are saved.
• When finished, "Success!" is displayed.
4.
Click [Go to Date and Time page].
• The Date and Time page is displayed.
Setting Description
Time Setting • Select date and format (AM/PM or 24 H). These settings
are used for each images (Single, Multi and Buffered),
Trigger, Alarm Log and Operation Time. But E-mail subject
and file name by E-mail or FTP transfer uses only 24 h
format.
Automatic Time
Adjustment • NTP (Network Time Protocol) server synchronizes this
product's internal clock. It adjusts automatically every day.
Check the box to enable it.
• Set the NTP server IP address. In IPv4, set 4 digits (0—
255) and 3 periods such as "192.168.0.253". But "0.0.0.0"
and "255.255.255.255" are not available. In IPv6, set 8
hexadecimal digits divided with ":". Consecutive 0s can be
abbreviated as "::". Or set a host name
*1 (1—255
characters).
• Select your time zone.
Note
This product will not synchronize to the NTP server if the
time setting from the NTP server moves forward or
backward more than 1 hour at a time. This is to protect this
product's time setting from fraudulent NTP server
tampering, incorrect time information, etc.
*1 But [Space], ["], ['], [&], [<] and [>] are not available.
Adjust Clock for
Daylight Saving
Time • During the daylight saving time, the internal clock is turned
forward an hour. The clock will shift one hour forward at the
set time on the Start Day, and move back one hour at the
set time on the End Day. Check the box to enable it.
Note
An "s" is put between date and time of time stamp when
enabling this feature. The time stamp will be attached to
the transferred images by the Image Transfer feature.