Panasonic BB-HCS301A User Manual
Page 52
Operating Instructions
52
4.
Click [Save] when finished.
•
New settings are saved.
5.
Click [Cancel].
•
The IPsec page is displayed.
6.
Check [Use] in the IPsec column, select an encoding strength, and click
[Save].
Setting
Description
Status
•
Check the box to use this encryption method.
Pre-Shared Key
•
It is the key to use in the authentication of communications.
Enter the same pre-shared key as your VPN router.
•
Enter ASCII characters for the host name (see page 163).
But [Space], ["], ['], [&], [<] and [>] are not available.
Note
If the pre-shared key leaks to a third party, it may lead to illegal
access, private information leak or interference. To protect your
security and privacy, pay attention to the following points.
•
Make it known only to the specified people.
•
Set it as many characters as possible.
•
Change the password regularly.
Network address
•
Enter the destination network address.
•
Enter "IP address/Prefix length" in the data field.
Router address
•
Enter the WAN IP address of the VPN router on a
destination network.
Notes
•
IPv6 link-local address is not available.
•
This product can be accessed only from the PCs
under the VPN router. Other PCs cannot access this
product.