NISSAN CVT SIC0697 - Manual (Page 119)

ignition switch is in the ACC or ON position.
Move the switch to right
k
A or left k
B to select
the right or left outside mirror, then adjust the
mirror to the desired position by pushing the
button k
C .
Foldable outside mirrors
Fold the outside mirror by pushing it toward the
rear of the vehicle.
The automatic drive positioner system has two
features:
¼ Entry/exit function
¼ Memory storage
ENTRY/EXIT FUNCTION
This system is designed so that the driver’s seat,
pedals (Brake, Accelerator) and outside mirrors
will automatically move when the selector lever is
in the P (Park) position. This allows the driver to
get into and out of the driver’s seat more easily.
The driver’s seat will slide backward:
¼ When the key is removed from the ignition
switch.
¼ When the driver’s door is opened with the
key turned to LOCK.
¼ When the key is turned from ACC to LOCK
with the driver’s door open while the selector
lever is in the P (Park) position.
The driver’s seat will return to the previous
position:
¼ When the key is inserted into the ignition
switch.
¼ When the driver’s door is closed with the key
turned to LOCK.
¼ When the key is turned from ACC to ON
MPA0008
AUTOMATIC DRIVE POSITIONER
(if so equipped)
3-16 Pre-driving checks and adjustments
੬ 04.4.5/Z50-D/V5.0 ੭