NISSAN CVT SIC0697 - Manual (Page 138)

Selecting the time zone
1. Select the “Select Time Zone” key.
The [TIME ZONE] screen will appear. 2. Select one of the following zones depending
on the current location.
¼ “Pacific” zone
¼ “Mountain” zone
¼ “Central” zone
¼ “Eastern” zone
¼ “Atlantic” zone
¼ “Newfoundland” zone
After selection, the [CLOCK SETTINGS] screen
will appear.
The GPS time (manual time) corresponding to
the selected zone will be displayed.
“Pacific” zone has been set as the initial (default)
setting.
Beep setting:
When Beep setting is on (indicator light on), a
beep will sound if any audio button is pushed.
“DAY/NIGHT” BUTTON
To change the display brightness, push the
“DAY/NIGHT” button. Pushing the button again
will change the display to DAY or NIGHT dis-
play. Then, adjust the brightness moving the
joystick right or left.
If no operation is done within 10 seconds, or if
the “PREV” button is pushed, the display will
return to the previous display.
SAA0662 SAA0663
Display screen, heater, air conditioner and audio systems 4-15
੬ 04.4.5/Z50-D/V5.0 ੭