NISSAN CVT SIC0697 User Manual

Page 57

Advertising
background image

4. Allow the belt to retract. Pull up on the belt to

remove any slack in the belt.

5. Before placing the child in the child restraint,

use force to tilt the child restraint from side to

side, and tug it forward to make sure that it is

securely held in place. It should not move

more than 1 inch (25 mm).

6. Check that the retractor is in the automatic

locking mode by trying to pull more belt out of

the retractor. If you cannot pull any more belt

webbing out of the retractor, the belt is in the

automatic locking mode.

7. Check to make sure that the child restraint is

properly secured prior to each use. If the lap

belt is not locked, repeat steps 3 through 6.

After the child restraint is removed and the seat

belt is allowed to wind back into the retractor,

the automatic locking mode (child restraint

mode) is canceled; the seat belt only locks

during a sudden stop or impact.

SSS0056

SSS0302

1-44

Seats, restraints and supplemental air bag systems

04.4.5/Z50-D/V5.0

Advertising