NISSAN CVT SIC0697 - Manual (Page 83)

INSTRUMENT BRIGHTNESS
CONTROL
The instrument brightness control operates
when the light switch is in the or
position and the ignition switch is in the
ON position.
To adjust the brightness of instrument panel
lights, press the control switches located on the
left side of the meter panel. Pressing the upper
switch k
A will brighten the lights. The lower
switch k
B dims the lights. Repeatedly pressing
the lower switch will turn the lights off.
TURN SIGNAL SWITCH
k
1 Turn signal
Move the lever up or down to signal the turning
direction. When the turn is completed, the turn
signals cancel automatically.
k
2 Lane change signal
To indicate a lane change, move the lever up or
down to the point where lights begin flashing.
FOG LIGHT SWITCH (if so
equipped)
To turn the fog lights on, turn the headlight
switch to the position, then turn the switch
to the position. To turn them off, turn the
switch to the OFF position.
The headlights must be on for the fog lights to
operate (except for the daytime running light).
SIC2053 SIC2049 SIC2054
2-24 Instruments and controls
੬ 04.4.5/Z50-D/V5.0 ੭