Awd warning light -24, Warning – NISSAN CVT SIC0697 User Manual

Page 181

Advertising
background image

¼ When

turning

the

vehicle

in

ON/LOCK mode on paved roads, you
may feel a braking effect. This is a
normal condition of the AWD model.

AWD WARNING LIGHT

The AWD warning light is located in the meter.
The AWD warning light comes on when the key

switch is turned to ON. It turns off soon after the

engine is started.

If any malfunction occurs in the AWD system

when the key switch is ON, the warning light will

remain illuminated.
High-temperature power-train oil due to continu-

ous operation of the vehicle to free a stuck

vehicle makes the warning light blink rapidly

(about twice per second). The driving mode may

change to 2 wheel drive. OFF/AUTO mode may

change to ON/LOCK mode before the warning

light blinks. This is normal. If the warning light

blinks rapidly during operation, stop the vehicle

with the engine idling in a safe place immedi-

ately. Then if the light goes off after a while, you

can continue driving.
A large difference between the diameters of

front and rear wheels will make the warning light

blink slowly (about once per two seconds). Pull

off the road in a safe area, and idle the engine.

Check that all tire sizes are the same, tire

pressure is correct and tires are not worn.

WARNING

Do not attempt to test an AWD
equipped vehicle with two wheels on a
two wheel dynamometer and the other
two wheels raised. Doing so may result

SSD0314A

5-24

Starting and driving

04.4.5/Z50-D/V5.0

Advertising