Changing engine coolant -9, Engine oil -9, Checking engine oil level -9 – NISSAN CVT SIC0697 User Manual

Page 212

Advertising
background image

Lights*: Clean the headlights on a regular basis.

Make sure that the headlights, stop lights, tail

lights, turn signal lights, and other lights are all

operating properly and installed securely. Also

check headlight aim.
Road wheel nuts (lug nuts)*: When checking

the tires, make sure no wheel nuts are missing,

and check for any loose wheel nuts. Tighten if

necessary.
Tire rotation*: Tires should be rotated every

7,500 miles (12,000 km). However, the timing

for tire rotation may vary according to your

driving habits and road surface conditions.
Tires*: Check the pressure with a gauge often

and always prior to long distance trips. If neces-

sary, adjust the pressure in all tires, including the

spare, to the pressure specified. Check carefully

for damage, cuts or excessive wear.
Tire, wheel alignment and balance: If the

vehicle should pull to either side while driving on

a straight and level road, or if you detect uneven

or abnormal tire wear, there may be a need for

wheel alignment.
If the steering wheel or seat vibrates at normal

highway speeds, wheel balancing may be

needed.
For additional information regarding tires, refer to

“Important Tire Safety Information” (US) or “Tire

Safety Information” (Canada) in the Warranty

Information Booklet.
Windshield: Clean the windshield on a regular

basis. Check the windshield at least every six

months for cracks or other damage. Have a

damaged windshield repaired by a qualified re-

pair facility.
Windshield wiper blades*: Check for cracks

or wear if they do not wipe properly.

Inside the vehicle

The maintenance items listed here should be

checked on a regular basis, such as when

performing periodic maintenance, cleaning the

vehicle, etc.
Accelerator pedal: Check the pedal for

smooth operation and make sure the pedal does

not catch or require uneven effort. Keep the floor

mats away from the pedal.
Brake pedal and booster*: Check the pedal

for smooth operation and make sure it has the

proper distance under it when depressed fully.

Check the brake booster function. Be sure to

keep floor mats away from the pedal.
Brakes: Check that the brakes do not pull the

vehicle to one side when applied.
Continuously Variable Transmission (CVT)

P (Park) position mechanism: On a fairly

steep hill check that the vehicle is held securely

with the selector lever in the P (Park) position

without applying any brakes.
Parking brake*: Check that the lever has the

proper travel and make sure that the vehicle is

held securely on a fairly steep hill when only the

parking brake is applied.
Seat belts: Check that all parts of the seat belt

system (for example, buckles, anchors, adjusters

and retractors) operate properly and smoothly,

and are installed securely. Check the belt web-

bing for cuts, fraying, wear or damage.
Seats: Check seat position controls such as

seat adjusters, seatback recliner, etc. to ensure

they operate smoothly and that all latches lock

securely in every position. Check that the head

restraints move up and down smoothly and that

the locks hold securely in all latched positions.
Steering wheel: Check for changes in the

steering conditions, such as excessive free play,

hard steering or strange noises.
Warning lights and chimes: Make sure that all

warning lights and chimes are operating prop-

erly.
Windshield defroster: Check that the air

comes out of the defroster outlets properly and

in good quantity when operating the heater or air

conditioner.

Maintenance and do-it-yourself

8-3

04.4.5/Z50-D/V5.0

Advertising