National Instruments 653X User Manual

Page 64

Advertising
background image

Chapter 3

Timing Diagrams

© National Instruments Corporation

3-13

653X User Manual

653X device terminology differs from 8255 terminology.

•

Input—The REQ line carries the 8255 STB (Strobe) input signal, and
the 653X device ACK line carries the 8255 IBF (Input Buffer Full)
output signal.

•

Output—The REQ line carries the 8255 ACK input signal, and the
653X device ACK line carries the 8255 OBF (Output Buffer Full)
output signal.

Figure 3-9. 8255 Emulation Input Handshaking Sequence

Reference

Point

Action Steps

1

The 653X device asserts the ACK signal when ready to accept data.

2

The peripheral device can then strobe data into the 653X device by asserting the
REQ line. This can happen before or after ACK is asserted.

3

Asserting the REQ signal causes the ACK signal to deassert.

4

Deasserting the REQ signal causes the 653X device to latch input data.

5

The 653X device reasserts the ACK signal when it has space and is ready for
another input. A programmable delay can be inserted here.

ACK

REQ

1

2

4

3

5

ACK and REQ are shown as active low.

Steps 1-5 are repeated for each transfer.

Advertising