Nortel Networks M3310 - Manual (Page 103)

Digital Telephone IP Adapter Installation and Administration Guide 103
January 2005 Configuring the IP Adapter unit using the telephone menu
restrict access to
the Digital
Telephone IP
Adapter
unit
according to a ten
digit security
code maintained
by the security ID
of the qualified
callers,
1 Press 2 to select Provisioned Security.
2 Press the Hold key.
Result: The telephone display prompts you for the
RLC’s Inbound Security ID, similar to the following:
Inbound Security ID
3 Enter the Digital Telephone IP Adapter unit’s 10-
digit inbound security ID.
4 Press the Hold key.
Result: The telephone display prompts you for the
RLC’s outbound security ID, similar to the following:
Outbound Security ID
5 Enter the Digital Telephone IP Adapter unit’s 10-
digit outbound security ID.
6 Press the Hold key.
Result: The telephone display asks if you want to
enable the IP connection to the RLC from this Digital
Telephone IP Adapter unit, similar to the following:
Enable IP?
[1-Yes 2-No]
IF you want to THEN do the following: