Communications system and software requirements, Supported codecs – Nortel Networks M3310 User Manual

Page 49

Advertising
background image

Digital Telephone IP Adapter Installation and Administration Guide

49

January 2005

Digital Telephone IP Adapter description

Communications system and software requirements

The following table shows the software versions necessary to run Digital
Telephone IP Adapter units on compatible Nortel’s communications systems.

Digital Telephone IP Adapter units

Supported Codecs

The following tables show the Codecs supported by the Digital Telephone IP
Adapter unit, as well as the data stream, and approximate peak bandwidth
required by each.

Digital Telephone IP Adapters

Communications system

i

i. Requires Remote Gateway 9100 Series software version 1.5 or higher.

System software version

Meridian 1 PBX

X11 release 23 or higher

CS 1000

Release 2 or higher

CS 2100

Release MSL12 or higher

CODEC

Data stream only

Approximate peak bandwidth, including IP
overhead (30 ms voice packets)

G.711

64 Kbps

78 Kbps

G.729A

8 Kbps

22 Kbps

Advertising
This manual is related to the following products: