Nortel Networks M3310 - Manual (Page 116)

116 Digital Telephone IP Adapter Installation and Administration Guide
Changing configuration settings using Configuration Manager Standard 2.1
Emergency service programmability
There can be multiple emergency services at any one Digital Telephone IP
Adapter unit location, such as police, fire, and poison control. Click on the
Emergency Feature button to configure as many up to three different
emergency activation codes for one Digital Telephone IP Adapter unit. The
particular emergency activation code dialed by the user determines the digits
sent to the host PBX and the telephone number sent to the Central Office (CO).
Also, in their haste to reach an emergency service, some users can forget to dial
trunk access digits. You can configure your Digital Telephone IP Adapter unit to
send the emergency telephone number to the CO whether or not the user dials
trunk access digits.
Note: If you must contact emergency personnel with consecutive calls, you must
press the digits of the Emergency Access Code each time. Do not use last
number re-dial or the autodial keys.
Configuring the system settings
To configure the system settings:
1 Complete the fields as described in the “911x System Configuration field
descriptions” on page 118.
2 Click on the OK button to save the information in the temporary work file.