Nortel Networks M3310 - Manual (Page 135)

Digital Telephone IP Adapter Installation and Administration Guide 135
January 2005 Changing configuration settings using Configuration Manager
Auto Upgrade Configuration field descriptions
Field Description
Status
!
Click on the Enable option button if you want to
automatically or on a scheduled basis query a
predefined TFTP server and upgrade the firmware for
Remote Gateway 9100 Series units.
!
Click on the Disable option button if you do not want
to automatically or on a scheduled basis upgrade the
firmware for Remote Gateway 9100 Series units.
The default is Disable.
TFTP Server: IP Address Enter the IP address of the TFTP server you want to query
for the upgrade.
Start Auto Upgrade Click on the Start Auto Upgrade button to force the auto
upgrade process to begin regardless of the mode and time
configuration in the auto upgrade configuration.
Note: Use caution when forcing the auto upgrade process
as the system performs a self-reset on all units to make the
new firmware active once the download of new firmware
is complete.
Frequency Click on the option button that identifies how often you
want the unit to perform the auto upgrade process:
!
Once a Day
!
Once a Week
!
Once a Month
Time Select the time of day that you want the unit to perform the
auto upgrade process.
Day Select the day when you want the auto upgrade process to
be performed (if you selected “Once a Week” in the
Frequency field).