Nortel Networks M3310 - Manual (Page 80)

80 Digital Telephone IP Adapter Installation and Administration Guide
Installing the Digital Telephone IP Adapter unit Standard 2.1
Connecting the Digital Telephone External IP Adapter unit to the
network
To connect the Digital Telephone External IP Adapter unit to the network:
1 Add the Digital Telephone External IP Adapter unit to your Ethernet network
by making the following connections:
a. Connect one end of the Ethernet cable to the ETHERNET connector on
the Digital Telephone External IP Adapter unit .
b. Connect the other end to either an Ethernet hub or a network router.
2 Connect the Digital Telephone External IP Adapter unit to the power source
as follows:
a. Connect the appropriate plug on the power transformer to the power
connector on the Digital Telephone External IP Adapter unit.
b. Plug the power connector into an uninterruptible power supply (UPS) or
wall outlet.
3 Connect the Digital Telephone External IP Adapter unit to the digital
telephone as follows:
a. Connect one plug of the telephone cable supplied with the Digital
Telephone External IP Adapter unit to the jack marked DIGITAL
PHONE on the rear panel of the Digital Telephone External IP Adapter
unit.
b. Plug the other end of this cable to the jack on the digital telephone.
.
WARNING
Risk of equipment damage
To prevent damage to the Digital Telephone External IP
Adapter unit, ensure that the power source to the unit is turned
off until you complete all connections.