Nortel Networks M3310 - Manual (Page 123)

Digital Telephone IP Adapter Installation and Administration Guide 123
January 2005 Changing configuration settings using Configuration Manager
Configuring IP information
To change the IP information:
1 Complete the fields of the IP Configuration property sheet as described in
“IP Configuration field descriptions” on page 125.
2 Click on the OK button to save the information in the temporary work file.
3 Click on the Send button to update the Digital Telephone IP Adapter unit
with the new information.
IF you are THEN
logged on to the
Digital Telephone IP
Adapter unit, the changes are written into the Digital
Telephone IP Adapter unit’s buffer.
To save the changes in Flash memory, choose
Upload/Download
→
Save to Flash from the
Menu Bar.
Note: When you change System or IP
Configuration parameters and Save to Flash,
calls can be dropped. Ensure that there are no
active calls when you make changes to these
configuration parameters.
not logged on to the
Digital Telephone IP
Adapter unit, the Configuration Manager dialog box displays,
similar to the following:
Do one of the following:
a.
Log on to the Digital Telephone IP
Adapter unit, then click on the Send
button again.
b. Save the changes to a file on your
administration PC.