Nortel Networks M3310 - Manual (Page 89)

Digital Telephone IP Adapter Installation and Administration Guide 89
January 2005 Configuring the IP Adapter unit using the telephone menu
4 The telephone display asks if you want to restore default values, similar to
the following:
Restore Default Values?
[1-Yes 2-No]
IF you want to THEN do the following:
retain current
configuration
settings for this
Digital Telephone
IP Adapter unit, 1 Press 2.
2 Press the Hold key.
3 Proceed to step 5 on page 90.
revert Digital
Telephone IP
Adapter unit
configuration
settings to their
factory-set default
values, 1 Press 1.
2 Press the Hold key.
Result: The telephone display asks you to confirm
your decision, similar to the following:
Confirm?
[1-Yes 2- No]
3 Press 1 to confirm your decision, or press 2 to retain
current settings.
4 Press the Hold key.