Migrating from raid 5 to raid 0 – Nvidia 4 User Manual
Page 119
Advertising
NVIDIA Corporation
115
C
HAPTER
3
Using the NVIDIA MediaShield RAID Management Utility
Migrating from RAID 5 to RAID 0
The following example shows you how to convert a RAID 5 array with three disks to a
RAID 0 array with three disks.
1 Go to the system BIOS and make sure that the drives that you want to use are RAID
enabled.
2 Boot to Windows, launch the MediaShield application, then follow the steps outlined in
“Creating a RAID 5 Array” on page 62
.
When that is done, you should see a screen shot similar to the following:
Figure 3.119 RAID Array Created
3 Click on RAID 5 and select “Convert Array...” as shown in the following screen shot:
Figure 3.120 Selecting “Convert Array” from the Pop Up Menu
Advertising