Nvidia 4 User Manual
Page 54
Advertising
50
MediaShield User’s Guide – Version 4.0
C
HAPTER
3
Using the NVIDIA MediaShield RAID Management Utility
8 To clear all system data from the drives click on Next and the following will appear:
Figure 3.21 Completing the NVIDIA Create Array Wizard
9 Click Finish and the following screen shot will appear:
Figure 3.22 Stripe RAID Array Created
As you can see from the above screen shot a striped array with two SATA disks has
been created, while the other two disks are allocated as Free Disks.
To create an array with three or more disks, be sure to add the number of disks that you
want to use in the array during creation. To “extend” the size of an existing striped
array, use the process described in
“Migrating From One RAID Array to Another” on
.
Advertising