Nvidia 4 - Manual (Page 99)

NVIDIA Corporation 95
C HAPTER 3
Using the NVIDIA MediaShield RAID Management Utility
Migrating from RAID 0+1 to RAID 0
The following example shows you how to convert from a RAID 0+1 array with four disks
to a RAID 0 array with four disks.
1 Go to the system BIOS and make sure that the drives that you want to use are RAID
enabled.
2 Boot to Windows, launch the MediaShield application, then follow the steps outlined in
“Creating a Stripe Mirroring Array” on page 54 to create a four-disk mirrored stripe
array. When that is done, you should see a screen shot similar to the following:
Figure 3.88 RAID Array Created
Now that a four-disk mirrored stripe array has been created, you can use the
MediaShield convert feature to migrate the array from a four-disk RAID 0+1 into a
four-disk RAID 0 array.