Nvidia 4 User Manual
Page 81
NVIDIA Corporation
77
C
HAPTER
3
Using the NVIDIA MediaShield RAID Management Utility
Migrating from RAID 0 (with One Disk) to RAID 1 (with Two Disks)
The following example shows you how to convert a RAID 0 array with one disk to a RAID
1 array (with two disks)
1 Go to the system BIOS and make sure that the drives that you want to use are RAID
enabled.
2 Boot to Windows, launch the MediaShield application, then follow the steps outlined in
“Creating a Striped Array” on page 47
with the exception that you need to select one
disk instead of two disks.
When that is done, you should see a screen shot similar to the following:
Figure 3.60 RAID Array Created
3 Click click on Striping and select “Convert Array...” as shown in the following screen
shot:
Figure 3.61 Selecting “Convert Array” from the Pop Up Menu