Creating a mirrored array – Nvidia 4 User Manual
Page 55
Advertising
NVIDIA Corporation
51
C
HAPTER
3
Using the NVIDIA MediaShield RAID Management Utility
Creating a Mirrored Array
The MediaShield application can be used to create a Mirrored Array. By definition, a
mirrored array consists of two drives. Data is written to both drives, and if one drive fails
then data can be recovered from the other drive.
To create a Mirrored Array, do the following:
1 Make sure the drives that you want to use are RAID-enabled in the system BIOS.
2 Select the Custom option in the MediaShield Create Wizard.
3 Click Next and the following screen will appear:
Figure 3.23 Free Disk Selection Page
4 Select the two drives that you want to use in the Mirrored array.
Advertising