Nvidia 4 - Manual (Page 62)

58 MediaShield User’s Guide – Version 4.0
C HAPTER 3
Using the NVIDIA MediaShield RAID Management Utility
Creating a Spanning Array
MediaShield can be used to create a Spanning Array which requires at least one disk to
start such an array.
To create a Spanning Array do the following:
1 Make sure the drives that you want to use are RAID-enabled in the system BIOS.
2 Select the Custom option in the MediaShield Create Wizard.
3 Click Next and the following screen will appear:
Figure 3.35 RAID Array Selection Page