Nvidia 4 - Manual (Page 158)

154 MediaShield User’s Guide – Version 4.0
C HAPTER 7
MediaShield Application Notes
GenNvRaidDisk = "nvraid"
*_NVRAIDBUS = "nvraid"
*NVRAIDBUS = "nvraid"
Note: Your platform will likely have different device IDs, so you should modify
your entries accordingly.
d Add NVIDIA storage drivers to the SCSI preload section.
[SCSI.Load]
nvatabus = NvAtaBus.sys,4
nvraid = nvraid.sys,4
e Add the message that will get displayed during text setup driver load.
[SCSI]
nvraid = "NVIDIA RAID CLASS DRIVER"
nvatabus = "NVIDIA nForce SATA Controller"
4 Modify hivesft.inf to include the driver files location info into the DevicePath
registry key.
This tells the GUI mode setup where to find the driver files. Since this example places
them in ʺ%systemroot%\nvidia\nvraidʺ, that is what we use here:
HKLM,"SOFTWARE\Microsoft\Windows\
CurrentVersion","DevicePath",0x00020002,"%SystemRoot%\
inf";"%systemroot%\nvidia\nvraid"
Burning a CD
There are a number of tools that allow you to burn a bootable CD image. Here are some
tips when using Nero.
• Select CD-ROM [Boot] option
• Select the Boot tab and
• Set image to file in c:\slipstream\XP-BootImage
• Select “Enable expert settings”
• Set Kind of Emulation to No Emulation
• Set load segment to 07C0
• Set number of loaded segments to 4 (Very important!)
• Select ISO 9660 Volume label to
• XP Professional enter WXPCCP_EN
• XP Home enter WXHCCP_EN