Nvidia 4 - Manual (Page 18)

14 MediaShield User’s Guide – Version 4.0
C HAPTER 2
Setting Up Your RAID Configuration
The BIOS CMOS Setup Utility window appears.
Figure 2.1 BIOS CMOS Setup Utility Main Window
2 Use the arrow keys to select Integrated Peripherals (see Figure 2.1 ), then press Enter.
The Integrated Peripherals window appears.
Figure 2.2 Integrated Peripherals Window
3 Use the arrow keys to select the RAID Config (see Figure 2.2 ), then press Enter.
Standard CMOS Features
^
Advanced BIOS Features
Advanced Chipset Features
Integrated Peripherals
Power Management Setup
PnP / PCI Configurations
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
Esc : Quit
F10 : Save & Exit Setup
: Select Item
Onboard IO, IRQ, DMA Assignment ...
Phoenix - Award BIOS CMOS Setup Utility
Phoenix - Award BIOS CMOS Setup Utility
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
Integrated Peripherals
Item Help RAID Config
OnChip IDE Channel0
Primary Master PIO
Primary Slave PIO
Primary Master UDMA
Primary Slave UDMA
OnChip IDE Channel1
Secondary Master PIO
Secondary Slave PIO
Secondary Master UDMA
Secondary Slave UDMA
IDE Prefetch Mode
Init Display First
OnChip USB
USB Keyboard Support
USB Mouse Support
Serial - ATA
SATA Spread Spectrum
AC97 Audio
[Press Enter]
[Enabled]
[Auto]
[Auto]
[Auto]
[Auto]
[Enabled]
[Auto]
[Auto]
[Auto]
[Auto]
[Enabled]
[PCI Slot]
[V1.1 - V2.0]
[Disabled]
[Disabled]
[Enabled]
[Disabled]
[Auto]
Menu Level
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults