Nvidia 4 - Manual (Page 19)

NVIDIA Corporation 15
C HAPTER 2
Setting Up Your RAID Configuration
The RAID Config window appears.
Figure 2.3 RAID Config Window
4 From the RAID Config window, globally enable RAID, then enable the SATA ports
with disks that you want to use for RAID.
If RAID is enabled globally but not enabled on the individual SATA port, disks on that
port can only be used for non-RAID applications.
In the example in Figure 2.3 , four SATA ports are enabled, so the non-bootable RAID
array can include up to four SATA disks. If there is a disk connected to ʺSATA 3
Primary” or “SATA 3 Secondaryʺ, it can not be used for RAID.
5 Press F10 to save the configuration and exit.
The PC reboots.
Phoenix - Award BIOS CMOS Setup Utility
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
RAID Config
Item Help RAID Enable
SATA 1 Primary
SATA 1 Secondary
[Enable]
RAID [Enabled]
RAID [Enabled]
Menu Level
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
SATA 2 Primary
SATA 2 Secondary RAID [Enabled]
RAID [Enabled]
SATA 3 Primary
SATA 3 Secondary RAID [Disabled]
RAID [Disabled]