Nortel Networks NN43001-504 - Manual (Page 104)

104 WLAN IP Telephony Manager 2245 configuration
Fore more information about the master WLAN IP Telephony Manager
2245, see
"Master WLAN IP Telephony Manager 2245" (page 60) .
• Hostname:—optional field. Change the default hostname of this WLAN
IP Telephony Manager 2245, if desired. Hostname is for identification
purposes only.
Note: Spaces cannot be entered in this field.
• Subnet mask—the subnet mask of the subnet.
• Default Gateway—the default gateway for the subnet.
• SVP-II TFTP Download Master—the IP address of the TFTP Server
where the software update files are saved. Enter one of the following:
— NONE—disables this function
— IP address of the TFTP Server that transfers software updates to the
WLAN IP Telephony Manager 2245
• Primary DNS Server, Secondary DNS Server, DNS Domain—used
to configure Domain Name Services (DNS). Obtain the settings from
the network administrator. Optionally, enter DHCP. This enables the
DHCP client in the WLAN IP Telephony Manager 2245 to attempt to
automatically obtain a valid IP address from the DHCP Server. The
DHCP setting is only valid when the IP address is obtained from DHCP.
• WINS Server—the IP address of the Windows Name Services (WINS)
Server. Obtain the settings from the network administrator. Optionally,
enter DHCP. This enables the DHCP client in the WLAN IP Telephony
Manager 2245 to attempt to automatically obtain a valid IP address
from the DHCP Server. The DHCP setting is only valid when the IP
address is obtained from DHCP.
When WINS is configured, the WLAN IP Telephony Manager 2245 can
translate hostnames to IP addresses. This means that when using
Telnet, the WLAN IP Telephony Manager 2245 can be accessed using
its hostname rather than its IP address.
• Workgroup—indicates whether a workgroup is configured in the WINS
Server.
• Syslog Server—the IP address of the server where the system logs for
the WLAN IP Telephony Manager 2245 are written. If a Syslog Server is
configured, a message is sent to the Syslog Server when an alarm is
generated. Enter one of the following:
— NONE—disables this function
— IP address of the Syslog Server
Nortel Communication Server 1000
WLAN IP Telephony Installation and Commissioning
NN43001-504 01.02 Standard
Release 5.0 15 June 2007
Copyright © 2004-2007, Nortel Networks
.