Nortel Networks NN43001-504 - Manual (Page 140)

140 Troubleshooting
MANUFACTURER CODE: [NAME]
MODEL:
NT CODE: NT2K00GI
COLOR CODE: 66
RLS CODE: 0
SER NUM: 7641C7
FWSW VERSION: 0602B59
.idu 62 2
I2004 TN: 062 0 00 02 V
TN ID CODE: i2004
ISET MAC ADR: 00:90:7A:01:7E:47
ISET IP ADR: 192 .168 .010 .200
LTPS IP ADR: 047 .011 .214 .165
MANUFACTURER CODE: [NAME]
MODEL:
NT CODE: NTTQ5010
COLOR CODE: 66
RLS CODE: 7
SER NUM: 017E47
FWSW VERSION: 097.021
LD 32 STAT command
The wireless handsets are shown REGISTERED in the standby and active
modes. In the following example, 61 0 is an IP Phone 2004 and 62 2 is a
WLAN Handset 2211 in the standby mode.
.stat 61 0
IDLE REGISTERED 00
.stat 62 2
IDLE REGISTERED 00
LD 117 Inventory command
In the inventory report, the wireless handsets have a specific release code
and NT code, similar to the IDU command output. In the following example,
61 0 is an IP Phone 2004 and 62 2 is a WLAN Handset 2211.
=> inv prt sets
Set inventory:
17 10 2003 8 17 21, 17 10 2003 8 17 22, 6
i2004, 61 00, i2004 NT2K00GI 66 0 7641C7, I2004 , 6000
i2004, 62 02, i2004 NTTQ5010 66 7 017E47, I2211 , 6502
LD 117 STIP command
The STIP command can be used for wireless handsets; however, the
wireless handset alias IP address appears as the TERMIP in the command
output, instead of physical IP address. In the following example, the
Nortel Communication Server 1000
WLAN IP Telephony Installation and Commissioning
NN43001-504 01.02 Standard
Release 5.0 15 June 2007
Copyright © 2004-2007, Nortel Networks
.