Nortel Networks NN43001-504 - Manual (Page 169)

Software 169
Nortel periodically upgrades the fnctla.bin file, which is the only file
downloaded. The other files are configuration files and their names are
provided for information and backup purposes.
Obtain software using FTP
When using FTP, a host system is used to connect to a remote system. In
this example, the host is the client and the server is the WLAN Application
Gateway 2246. The put command means to copy the files from the host
to the remote system.
Note: FTP commands vary with the particular FTP program used. Use
the following steps as a general guide but be aware that an FTP program
can use different terms to describe the procedure.
Follow the steps in Procedure 26 "Transferring the software using FTP"
(page 169) to transfer the software using FTP.
Procedure 26
Transferring the software using FTP
Step Action
1 Navigate to the OAI Box Configuration screen and place the system
in Maintenance Lock before proceeding with the FTP procedure.
Note: This prevents new calls from starting. No calls can be in
progress during the FTP procedure.
2 Connect to the WLAN Application Gateway 2246 using the
command:
FTP <hostname>
OR
FTP <IP address> .
3 Log on using the default administrator logon and password:
admin
admin
4 At the FTP prompt, type binary.
5 At the FTP prompt, rename and transfer the functional code file to
the client server or WLAN Application Gateway 2246.
put mog700.bin fnctla.bin
where
MOG700.bin is the downloaded file.
fnctla.bin is the new name of the file.
6 After the file transfer is complete, use the Quit command to quit FTP.
Nortel Communication Server 1000
WLAN IP Telephony Installation and Commissioning
NN43001-504 01.02 Standard
Release 5.0 15 June 2007
Copyright © 2004-2007, Nortel Networks
.