Tps cli commands – Nortel Networks NN43001-504 User Manual
Page 141
Dropped calls
141
192.168.10.200 is an alias IP address assigned by the WLAN IP Telephony
Manager 2245.
TN HWID STATUS HOSTIP TERMIP PORT
______ _______________________________ ______
__________ ____________ _______
0x600a 00000000000003000907a017e476607 REG
47.11.214.165 192.168.10.200 0x1450
CAPS
_________
0x00000000
--------------------------------
codec bdwth(k) codecCaps desc
--------------------------------
4 190 0x00000000 1
3 190 0x00000000 1
17 47 0x00000001 1
value = 537232412 = 0x2005841C
Note: For information about more CLI commands, see
TPS CLI commands
The following sections describe TPS command line interface (CLI)
commands.
dsetShow command
In the
dsetShow
command output, the handsets have a specific Hardware
ID. The alias IP address is output, not the physical wireless handset IP
address.
In the following example, the IP Phone 2004 has an IP address of
192.168.10.100 and the WLAN Handset 2211 has an alias IP address of
192.168.10.200. The syntax of the Hardware ID is as follows:
•
first two digits—Manufacturer Location. Manufacturer Location is 18 for
the IP Phone 2004 and 30 for the WLAN Handset 2211.
•
next six digits—Manufacturer Code. The Manufacturer Codes are
defined as follows:
— IP Phone 2004 Phase 1—006038
— IP Phone 2004 Phase 2—000ae4
— WLAN Handset 2210—00907a
— WLAN Handset 2211—00907a
— WLAN Handset 2212—00907a
Nortel Communication Server 1000
WLAN IP Telephony Installation and Commissioning
NN43001-504
01.02
Standard
Release 5.0
15 June 2007
Copyright © 2004-2007, Nortel Networks
.