Syslog capture configuration – Nortel Networks NN43001-504 User Manual

Page 215

Advertising
background image

Data capture

215

the TLAN and ELAN IPs for the Voice Gateway Media Cards (VGMC)

a network diagram

For more information, see

"Network diagram" (page 215)

.

a site survey

screenshots of the DHCP server scope with the fields fully expanded
(no truncation of data in the view)

the encryption protocol

the software version of the WLAN IP Telephony Manager 2245

the firmware version of the test handset

the release (RLS) of the PBX software

the version of the code that currently runs on the Signaling Servers

the software version on the VGMCs

the make, model and software version of the AP, the Controller or the
WLAN Manager

Network diagram

For each element in the network, include the following information as it
applies to each element:

manufacturer

model identification

software version

firmware version

loadware version

IP addresses

MAC addresses

port assignments

VLANs

other connectivity information

Syslog capture configuration

Configure DHCP Option 7 with the IP of the Syslog Server or, if you are not
using DHCP, configure this manually as a static entry in the handset

Configure the IP of the Syslog Server in the WLAN IP Telephony Manager
2245: Network configuration > Syslog Server.

Nortel Communication Server 1000

WLAN IP Telephony Installation and Commissioning

NN43001-504

01.02

Standard

Release 5.0

15 June 2007

Copyright © 2004-2007, Nortel Networks

.

Advertising