Nortel Networks NN43001-504 - Manual (Page 172)

172 Appendix A WLAN Application Gateway 2246
OAI
Port
MAC Address User Name
Dialing
Ext.
IP Address (if static)
26
27
28
29
30
Free the serial port for administrative purposes
If the serial port is being used as the primary communication link with the
Application Server, you must enter the OAI command to free the serial port
to allow it to be used for administrative purposes, such as changing the IP
address of the WLAN Application Gateway 2246.
To free the serial port to allow it to be used for administrative purposes,
follow the steps in
Procedure 14 "Connecting to the WLAN Application
Gateway 2246 through a serial port" (page 152) .
After configuring the WLAN Application Gateway 2246, perform the
following steps to again use the serial port as the communication link with
the Application Server.
Procedure 28
Using the serial port as the Application Server communication link
Step Action
1 Disconnect the terminal or PC from the serial port on the WLAN
Application Gateway 2246.
2 Reconnect the communication cable between the WLAN Application
Gateway 2246 and the Application Server.
3 Reset the system.
—End—
Normal communication between the Application Server and WLAN
Application Gateway 2246 commences.
Nortel Communication Server 1000
WLAN IP Telephony Installation and Commissioning
NN43001-504 01.02 Standard
Release 5.0 15 June 2007
Copyright © 2004-2007, Nortel Networks
.