Nortel Networks NN43001-504 User Manual

Page 133

Advertising
background image

Dropped calls

133

Message

Description

Action

No Host IP (Addr)

The wireless handset is
configured for static IP (as
opposed to use DHCP) and
no valid host IP address (the
wireless handset IP address) is
entered.

Enter a valid IP address in
the configuration settings or
change to use DHCP.

No IP Address

Invalid IP address.

Check the IP address of
the wireless handset and
reconfigure if required.

No Net Access

Cannot authenticate or
associate with AP.

Verify the AP configuration.
Verify that all the WEP settings
in the handset match those in
the APs.

No Net Found

This indicates any of the
following:

(For the WLAN Handsets
2210/2211/ 2212 only.)

No radio link

Verify that the AP is turned on.

No ESSID—Autolearn
not supported (or)
incorrect ESSID

Verify the ESSID of the wireless
LAN and enter or Autolearn it
again, if required.

AP does not support
appropriate data
ranges

Check the AP configuration
against the AP Configuration
Note.

Out of Range

Try getting closer to an AP.
Check to see if other handsets
are working within the same
range of an AP. If so, check the
ESSID of the handset.

Incorrect WEP settings

Verify that all the WEP settings
in the handset match those in
the APs.

Incorrect Security
settings

Verify that all the Security
setting in the AP.

No Net Found

This indicates any of the
following:

(For the WLAN Handsets
6120/6140 only.)

No radio link

Verify that the AP is turned on.

No ESSID—Autolearn
not supported (or)
incorrect SSID

Verify the SSID of the wireless
LAN and enter or Autolearn it
again, if required.

AP does not support
appropriate data
ranges

Check the AP configuration
against the AP Configuration
Note.

Nortel Communication Server 1000

WLAN IP Telephony Installation and Commissioning

NN43001-504

01.02

Standard

Release 5.0

15 June 2007

Copyright © 2004-2007, Nortel Networks

.

Advertising