Nortel Networks BSG12aw - Manual (Page 46)

46 Cable connection
NN47928-302 NN47928-302
4 Plug one end of the power-supply cable into the BSG8ew power supply.
5 Plug the other end of the power-supply cable into the AC power source (wall
outlet).
The BSG8ew boots and the system LED turns solid green.
End
Connecting power to the BSG12ew/aw/tw
Use this procedure to connect power to the BSG12ew/aw/tw.
Prerequisites
• Install the BSG12ew/aw/tw.
Procedure steps
Step Action
1 Plug one end of the power-supply cable into the BSG12ew/aw/tw power supply.
2 Plug the other end of the power-supply cable into the AC power source (wall
outlet).
The BSG12ew/aw/tw boots and the system LED turns solid green.
End
Connecting the BSG8ew/12ew/aw/tw to the WAN
Use this procedure to connect the BSG8ew/12ew/aw/tw to the WAN.
Prerequisites
• Connect power to the BSG8ew/12ew/aw/tw.
• Obtain a standard Ethernet cable.
Procedure steps
Step Action
1 Plug one end of a standard Ethernet cable into the WAN port on the front of your
BSG8ew/12ew/aw/tw.
2 Plug the other end of the Ethernet cable into your WAN edge device (for
example, an external ADSL modem or cable modem).
3 Plug the RJ11 telephone jack into the ADSL WAN module if you have a
BSG12aw.