Network Technologies DVB-ASI to IP - Manual (Page 29)

ASI-IP-GTW User's Manual
Page 29
3.5 Device Info
Figure 8 shows the Device Info page.
Figure 8. The device info page
The upper part of the Device Info page contains product information.
This includes the following parameters:
Name: The name of the unit configured by the user.
Product type: ASI-IP-GTW
Serial number: A number which uniquely identifies the unit.
Software version: The version number of the software running on the
unit.
Software build time: The time and date when the software was
compiled.
Internal temperature: The internal temperature of the unit shown in
degrees Celsius and Fahrenheit.
Flash Power LED: When this button is pressed, the power LEDs on rear
and front of unit will flash for a short period. This functionality can be
used to identify a unit in a rack.
Mode of Operation: Select ‘ASI --> IP’ for IP transmit mode. In this
mode the ASI connectors operate as inputs, and the MPEG2 transport
streams on these can be transmitted on the Ethernet port.
Select ‘ASI <-- IP’ for IP receive mode. In this mode, the ASI connectors
operate as outputs, and transport streams can be mapped from the
Ethernet port to the ASI outputs.