Network Technologies DVB-ASI to IP - Manual (Page 49)

ASI-IP-GTW User's Manual
Page 49
Max frames delay: This field shows the maximum number of frames
delay measured for the FEC streams.
Latency required: This field is calculated from the ‘Max frames delay’
field and the current total bitrate to show the minimum delay needed
by the FEC engine to fully utilize the incoming FEC streams.
When the delay displayed in the ‘Latency’ field of the ‘IP RX Status’
sub-page falls below the value of ‘Latency required’ field, the FEC
engine may not be able to recover all lost frames that could have been
corrected with a larger buffer.
For Column and Row the following status parameters are shown:
UDP port: The UDP port of the stream.
Bitrate: The bitrate of the incoming FEC stream.
RTP sequence error: This counter shows the RTP sequence errors in
the incoming stream caused by lost IP frames or out-of-order packets.