Network Technologies DVB-ASI to IP - Manual (Page 70)

ASI-IP-GTW User's Manual
Page 70
6 Preventive Maintenance and Fault-finding
6.1 Introduction
This chapter provides the schedules and instructions, where applicable,
for routine inspection, cleaning and maintenance of the ASI-IP-GTW to
be carried out by the operator of the unit.
6.2 Preventive Maintenance
6.2.1 Routine Inspection
1.1.1.35 Cooling fans
This equipment must never be used unless all the cooling fans are
working. They should be checked when the unit is switched on and
periodically thereafter.
6.2.2 Cleaning
o
Remove power from the unit.
o
Clean the external surfaces of the ASI-IP-GTW with a soft cloth
dampened with a mixture of mild detergent and water.
o
Make sure that the unit is completely dry before reconnecting it to
a power source.
6.2.3 Servicing
1.1.1.36 Damage requiring service
Unplug the unit from the power and refer servicing to qualified
personnel under the following conditions:
o
The power supply cord or plug is damaged
o
Liquid has been spilled or objects have fallen into the product
o
Product has been exposed to rain or water
o
Product does not operate normally by following the operating
instructions
o
Product has been dropped or has been damaged
o
Product exhibits a distinct change in performance
6.3 Maintenance
6.3.1 Warranty
The ASI-IP-GTW is covered by standard Network warranty service for a
period of 12 months from delivery.
Warning: Do not attempt to service this product as opening or
removing covers may expose dangerous voltages or other hazards. Refer
all servicing to service personnel who have been authorised by Network.