National Instruments PCI-6110E/6111E - Manual (Page 9)

© National Instruments Corporation xi PCI-6110E/6111E User Manual
About
This
Manual
This manual describes the electrical and mechanical aspects of the
611X E family of boards and contains information concerning their
operation and programming.
The 611X E family of boards includes:
• PCI-6110E
• PCI-6111E
Your 611X E board is a high-performance multifunction analog, digital,
and timing I/O board for PCI bus computers. Supported functions
include analog input, analog output, digital I/O, and timing I/O.
Organization of This Manual
The PCI-6110E/6111E User Manual is organized as follows :
• Chapter 1, Introduction, describes your 611X E board, lists what
you need to get started, describes the optional software and optional
equipment, and explains how to unpack your 611X E board.
• Chapter 2, Installation and Configuration, explains how to install
and configure your 611X E board.
• Chapter 3, Hardware Overview, presents an overview of the
hardware functions on your 611X E board.
• Chapter 4, Signal Connections, describes how to make input and
output signal connections to your 611X E board via the board I/O
connector.
• Chapter 5, Calibration, discusses the calibration procedures for
your 611X E board.
• Appendix A, Specifications, lists the specifications of your 611X E
board.
• Appendix B, Cable Connector Descriptions, describes the cable
connectors on your 611X E board.
PCI_E.book Page xi Thursday, June 25, 1998 12:55 PM