Nortel Networks N300 - Manual (Page 13)

ymL15wN aDSL2+/3G wireless N300 4-Port modem Router
www.netcomm.com.au 13
NetComm Gateway Series - ADSL2+/3G Wireless N300 4-Port Modem Router
Default settings
LAN (Management)
Static IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
WAN (Internet)
WAN mode: DHCP
Wireless
SSID: NetComm wireless
Channel: auto
Security: wEP, 64bit
WEP Key: a1b2c3d4e5
Interface Access
Username: admin
Password: admin
Restore Factory Default Settings
Restoring factory defaults will reset the 3G15Wn to its factory default configuration. Occasions may present themselves where you need to
restore the factory defaults on your 3G15wn such as:
• You have lost your username and password and are unable to login to your 3G15Wn’s web configuration page;
• You have purchased your 3G15Wn from someone else and need to reconfigure the device to work with your ISP;
• You are asked to perform a factory reset by NetComm Support staff
In order to restore your 3G15wn to its factory default settings, please follow these steps:
• Ensure that your 3G15Wn is powered on (for at least 10 seconds);
• Use a paper clip or a pencil tip to depress the reset button for ten seconds and release. at this point, the reset is in progress. Do not
power off the unit at this point;
• When indicator lights return to steady green, reset is complete. The default settings are now restored. The entire process takes
about 45 seconds to complete;
• Once you have reset your 3G15Wn to its default settings you will be able to access the device’s configuration web interface using
http://192.168.1.1 with username ‘admin’ and password ‘admin’;
Connecting the 3G15wn
300Mbps Wireless Link
LAN 1 LAN 2 LAN 3 LAN 4
3G Tower
3G15Wn
3G USB Modem
ADSL2+
Telephone
Exchange