Nortel Networks N300 - Manual (Page 30)

aDSL2+/3G wireless N300 4-Port modem Router ymL15wN
30 www.netcomm.com.au
MAC filter
This screen appears when Media Access Control (MAC) Filter is selected. This option allows access to be restricted based upon the unique
48-bit maC address.
To add a MAC Address filter, click the Add button shown below.
To delete a filter, select it from the table below and click the Remove button.
Option Description
MAC Restrict Mode Disabled – Disables MAC filtering
Allow: Permits access for the specified MAC addresses
NOTE: Add a wireless device’s MAC address before clicking the Allow radio button or else
you will need to connect to the Router’s web user interface using the supplied yellow Ethernet
cable and add the wireless device’s MAC address.
Deny Rejects access for the specified MAC addresses
MAC Address Lists the maC addresses subject to the maC Restrict mode. the add button prompts an
entry field that requires you type in a MAC address in a two-character, 6-byte convention: xx:
xx:xx:xx:xx:xx where xx are hexadecimal numbers. A maximum of 60 MAC addresses can be
added.
Enter the MAC address on the screen below and click Save/Apply.