Nortel Networks N300 - Manual (Page 33)

ymL15wN aDSL2+/3G wireless N300 4-Port modem Router
www.netcomm.com.au 33
NetComm Gateway Series - ADSL2+/3G Wireless N300 4-Port Modem Router
management
Device Settings
The Device Settings screens allow you to backup, retrieve and restore the default settings of your Router. It also provides a function for you
to update your Routers firmware.
Backup
The following screen appears when Backup is selected. Click the Backup Settings button to save the current configuration settings.
You will be prompted to define the location of a backup file to save to your PC.
Update
The following screen appears when selecting Update from the submenu. By clicking on the Browse button, you can locate a previously
saved filename as the configuration backup file. Click on the Update settings to load it
Restore Default
The following screen appears when selecting Restore Default. By clicking on the Restore Default Settings button, you can restore your
Routers default firmware settings. To restore system settings, reboot your Router.
NotE: the default settings can be found in the section Default Settings.
once you have selected the Restore Default Settings button, the following screen will appear. Close the window and wait 2 minutes before
reopening your browser. If required, reconfigure your PCs IP address to match your new configuration (see section 3.2 TCP/IP Settings for
details).
after a successful reboot, the browser will return to the Device Info screen. If the browser does not refresh to the default screen, close and
restart the browser.
NotE: the Restore Default function has the same effect as the reset button. the device board hardware and the boot loader support the reset to default button. If the reset button
is continuously pushed for more than 5 seconds (and not more than 12 seconds), the boot loader will erase the configuration settings saved on flash memory.