Nortel Networks N300 - Manual (Page 31)

ymL15wN aDSL2+/3G wireless N300 4-Port modem Router
www.netcomm.com.au 31
NetComm Gateway Series - ADSL2+/3G Wireless N300 4-Port Modem Router
wireless bridge
The following screen appears when selecting Wireless Bridge, and goes into a detailed explanation of how to configure wireless bridge
features of the wireless LaN interface.
Click Save/Apply to implement new configuration settings.
Option Description
AP Mode Selecting Wireless Bridge (Wireless Distribution System) disables Access Point (AP) functionality
while selecting access Point enables aP functionality. In access Point mode, wireless bridge
functionality will still be available and wireless stations will be able to associate to the aP.
Bridge Restrict Selecting Disabled in Bridge Restrict disables wireless Bridge restriction, which means that any
wireless bridge will be granted access. Selecting Enabled or Enabled (Scan) allows wireless bridge
restriction. Only those bridges selected in Remote Bridges will be granted access. Click Refresh to
update the station list when Bridge Restrict is enabled.
Station info
the following screen appears when you select Station Info, and shows authenticated wireless stations and their status.
Click the Refresh button to update the list of stations in the wLaN.
Option Description
MAC the maC address of any connected client
Associated Lists all the stations that are associated with the access Point, along with the amount of time
since packets were transferred to and from each station. If a station is idle for too long, it is
removed from this list.
Authorized Lists those devices with authorized access.
SSID The SSID of your wireless network
Interface the wireless interface being used to connect