Nortel Networks N300 - Manual (Page 58)

aDSL2+/3G wireless N300 4-Port modem Router ymL15wN
58 www.netcomm.com.au
ATM
Field Description
In Octets Number of received octets over the interface
Out Octets Number of transmitted octets over the interface
In Errors Number of cells dropped due to uncorrectable HEC errors
In Unknown Number of received cells discarded during cell header validation, including cells with
unrecognized VPI/VCI values, and cells with invalid cell header patterns. If cells with
undefined PTI values are discarded, they are also counted here.
In Hec Errors Number of cells received with an atm Cell Header HEX error
In Invalid Vpi Vci Errors Number of cells received with an unregistered VCC address.
In Port Not Enable Errors Number of cells received on a port that has not been enabled.
In PTI Errors Number of cells received with an ATM header Payload Type Indicator (PTI) error
In Idle Cells Number of idle cells received
In Circuit Type Errors Number of cells received with an illegal circuit type
In OAM RM CRC Errors Number of oam and Rm cells received with CRC errors
In GFC Errors Number of cells received with a non-zero GFC.
ADSL
The following graphic shows the ADSL Network Statistics screen. The Reset button (located at the bottom of the screen) can be used to
reset statistics. The bit error rate can be tested by clicking the ADSL BER Test button.