Nortel Networks N300 User Manual
Page 16
aDSL2+/3G wireless N300 4-Port modem Router
ymL15wN
16
www.netcomm.com.au
Wireless Quick Setup
1.
All the default settigns already appear on the wireless quick setup page
2.
you can enable/disable your wireless
3.
You can change your wireless SSID. If you do, be sure to remember the new name or write it down so you know what network to
connect to
4.
you can also select the level of wireless security and change the wireless password
5.
Once you have completed entering your wireless settings click Next
USB Storage
1.
If a USB device is plugged into the USB port, it will be detected and you will have the choice to Enable USB storage
2.
If you enable USB storage you will be shown the netbios and Directory name, you can change these to anything you want
3.
Click Next once you are happy with the settings
4.
to access the storage device open a web browser and type \\Netbios\Directory\. So using the defaults \\3G15Wn\USB-
Storage\
USB Print Server
1.
If a USB device is plugged into the USB port, it will be detected and you will have the choice to Enable on-board print server
2.
If you enable the device to work as a print server you will be asked to enter the printer name and make and model. Both fields
can be named anything you like. The names will be used to identify the printer later.
3.
Click Next once you are happy with the settings
4.
To complete setting up your network printer, please read Appendix A of the User Manual